How do I update my device with the MysteryVibe App?Updated a month ago
Check out this 3-minute video on how to update your vibrating device with the MysteryVibe App. To update the MV Remote with your app follow this process.
Video: https://youtu.be/xohbLE5mFQA
Step-by-Step Guide
Step 1: Open the app.
Step 2: Select your device.
Step 3: Turn on your device.
Step 4: Enable Bluetooth pairing on your device by pressing and holding the button with the dot icon for 2 seconds. The device will vibrate twice when Bluetooth is activated, and pairing mode stays active for 30 seconds so you can connect in the next step.
Note:
Android requires Location permission for Bluetooth to work. This is an internal Android requirement; the app does not use or track your location.
iOS: On some newer iOS devices, the app may install with Bluetooth turned off. To turn it on, go to Settings > Apps > MysteryVibe and make sure Bluetooth is enabled.
Step 5: On the app screen, tap Tap to Connect.
Step 6: The app will check your device for available updates. If an update is found, you’ll be prompted to install it—tap Yes.
Step 7: Wait 7-10 minutes for the update to complete, and don’t leave the page while it’s updating.
Step 8: When the update finishes, your device will disconnect and reboot to install the firmware.
Step 9: If the update is successful, the lights will flash red, green, blue, and white, and each motor will vibrate in a test sequence.
Step 10: Close and reopen the app, then reconnect to your device if you wish to use it.